Filter Housings

Reverse osmosis is a natural clean n clear reverse osmotic pressure. Osmosis, clean n clear a natural flow of the solution through a semi-permeable membrane from the less concentrated solution to the stronger side. This is caused by the osmotic pressure which results from the solution of the type and concentration clean n clear of the dissolved material. When the osmotic pressure on both sides of the equals (middle image), formed osmotic balance and flow stops. Following the establishment of higher pressure side of the stronger concentration of the solution results in the reverse clean n clear flow. Then the solution flows from the stronger to the weaker clean n clear side of concentration. This process called reverse osmosis.
Reverse osmosis plants with high pressure pump pushes the prepared feed water through the membrane. The membrane separates the purified water, called the product (permeate) and the rest of the high concentration of water, called the concentrate. The product is used or stored in the under pressure, or open containers until the water demand. The concentrate is discharged into the drains.
Untreated water is fed primary treatment mechanical filters. After clearing the majority of mechanical pulp (left Dalės mažesnėsnei 1 micron), the water travels clean n clear through the membrane. Diaphragm releases water into two parts, the product, and concentrate. The product is a low salt water with only trace amounts of salts, compared to the feed water. Concentrate is a high-salinity water which is discharged into the drains. The product is stored hydrofresh and ensure adequate flow of water if needed.
Membrane filter comprising: a mechanical filter: 5 micron cartridge, more intensive carbon cartridge, 1 micron cartridge. The membrane module of the membrane in case of insufficient water pressure (2.5 atm.) On the pump with a pressure sensor. SMOS industrial facility
The membrane filter is made up of: a mechanical filter clean n clear with a 5 micron cartridge. Glass-fiber clean n clear membrane module. Membrane. Valves and gauges, clean n clear such as solenoid inlet valve, inlet water pressure switch, product and concentrate flow meters, vibration-taking and concentrate pump gauges .... Microprocessor, which automatically controls the operation of the unit. It shows the product conductivity, forced the suspension and a full tank. Alarm signals: low pressure, high conductivity.
Filter Housings
More News